CG2 WA Kalekim Ultra Fuga Flex Grouting Mortar Additive Flex Tile Grou – Decoridea

Start typing and hit Enter

Shopping Cart

0

Your shopping bag is empty

Go to the shop

Menu
Login

or

Register

or

Don’t have an account?Register now

Register

Home Building and Display Materials CG2 WA Kalekim Ultra Fuga Flex Grouting Mortar Additive Flex Tile Grout 2-20 mm (5 Kg)

Prev

CG2 WA Kalekim Ultra Fuga Flex Grouting Mortar Additive Flex Tile Grout 2-20 mm (5 Kg)

CG2 WA Kalekim Ultra Fuga Flex Grouting Mortar Additive Flex Tile Grout 2-20 mm (5 Kg)

CG2 WA Kalekim Ultra Fuga Flex Grouting Mortar Additive Flex Tile Grout 2-20 mm (5 Kg)

CG2 WA Kalekim Ultra Fuga Flex Grouting Mortar Additive Flex Tile Grout 2-20 mm (5 Kg)

CG2 WA Kalekim Ultra Fuga Flex Grouting Mortar Additive Flex Tile Grout 2-20 mm (5 Kg)

£14.90

Delivery & Return Ask a Question

Dresses Size Chart

Dress Size Chart (Inch)

DRESSES SIZE IN INCHES
SIZE	US / CAN	BUST	WAIST	HIPS
XS	0	31"-32"	24"-25"	34"-35"
S	2-4	33"-34"	26"-27"	36"-37"
M	6-8	35"-36"	28"-29"	38"-39"
L	10-12	37"-39"	30"-32"	40"-42"
XL	14	40"-42"	33"-35"	43"-45"

Dress Size Chart (cm)

DRESSES SIZE IN CM
SIZE	US / CAN	BUST	WAIST	HIPS
XS	0	78.7-81.2	60.9-63.5	86.3-88.9
S	2-4	83.8-86.3	66-68.5	91.4-93.9
M	6-8	88.9-91.4	71.1-73.6	96.5-99
L	10-12	93.9-99	76.2-81.2	101.6-106.6
XL	14	101.6-106.6	81.2-88.9	109.2-114.3

Swimwear Size Chart

Dress Size Chart (Inch)

SWIMWEAR SIZE IN INCHES
SIZE	US / CAN	BUST	WAIST	HIPS
XS	0	31"-32"	24"-25"	33"-34"
S	2	33"-34"	26"-27"	35"-37"
M	4	35"-36"	28"-29"	37"-38"
L	6	37"-39"	30"-32"	39"-41"
XL	8	40"-42"	33"-35"	42"-44"

Shoes Size Chart

US	EURO	UK	AUS	JAPAN	CHINA
5	35-36	3	3.5	21.5	35
5.5	36	3.5	4	22	35.5
6	36-37	4	4.5	22.5	36
6.5	37	4.5	5	23	36.5
7	37-38	5	5.5	23.5	37
7.5	38	5.5	6	24	37.5
8	38-39	6	6.5	24.5	38
8.5	39	6.5	7	25	38.5
9	39-40	7	7.5	25.5	39
9.5	40	7.5	8	26	39.5
10	40-41	8	8.5	26.5	40
11	41-42	9	9.5	27.5	41

Delivery

Shipping Service

Samples are delivered by Royal Mail which is fast and free.
Small Parcels are delivered by courier companies (Royal Mail, DHL, DX or Envi/Hermes).
Boxes are delivered securely by pallet delivery (Palletways).
Vinyl Lino Flooring and Polycarbonate Sheets are delivered by parcel couriers (DX, Priority Express or Tuffnells).
Most uPVC windows and doors are delivered securely by pallet delivery (Palletways).
Collection in person is free. You can find the collection address at Contact Us.

Some zones within the following postcodes might be subject to a delivery surcharge*:

Scotland: AB, DD, FK, HS, IV, KA, KW, PA, PH, TD, ZE
England: PL, TR
Wales: LL, SA
Northern Ireland: BT

Colour

SKU :

Description

Product Definition

High performance (high resistance to abrasion and reduced water absorption), cementitious, silicone enhanced, grout for 2 to 20 mm joints.

Application Areas

Grouting interior and exterior floor and wall in all types and sizes of ceramic tiles,
granite, cotto, clinker, glass mosaics, marble, natural stone for 2-20 mm joints,
Grouting wet places like swimming pools, water tanks,
Grouting places where sudden temperature changes and heavy traffic exist like facades, terraces, over floor heating installations, warehouses.
Floor and wall grouting of places like bathrooms, showers, balconies and kitchens.

Features

Less prone to dirtiness, easy to clean.
Low water absorption with water reppellency.
Approved to be used in contact with water intended for human consumption.
Low shrinkage, therefore absence of cracks and fissures.
Very good abrasion resistance.
Good compressive and flexural strength and good resistance to freeze/thaw cycles.
Fast curing.
A smooth final surface.
Low water absorption.

Technical Features

(at 23°C and 50% RH)

General Data

Appearance: White and coloured powder
Shelf Life: 12 months when stored in the original sealed packing in dry place.

Application Data

Application Temperature Range: (+5°C)-(+35°C)
Mixing Ratio: 6.0-6.4 lt water / 20 kg powder
Pot Life: 30 minutes
Set to Light Traffic: 1 day
Consumption: See consumption table depending on width of the joints and dimensions of the tile.

Performance Data

Flexural Strength (EN 12808-3): ≥ 2.5 N/mm²
Compressive Strength (EN 12808-3): ≥ 15 N/mm²
Flexural Strength (after freeze/thaw cycles) (EN 12808-3): ≥ 2.5 N/mm²
Compressive Strength (after freeze/thaw cycles) (EN 12808-3): ≥ 15 N/mm²
Abrasion Resistance (EN 12808-2): ≤ 1000 mm³ Shrinkage (EN-12808-4): ≤ 3 mm/m
Water Absorption after (30 min / 4 hours) (EN 12808-5): ≤ 2 g / ≤ 5 g
Service Temperature Range (after final cure): (-30°C)-(+80°C)

Application Instructions

Adhesive must be cured prior to grouting.
Pour Ultrafupa Flex slowly on clean water at an amount specified in the technical table and mix until a homogeneous mixture is obtained. A low speed mixer is recommended to use. The amount of water should be precisely measured. Do not add any additive which is not mentioned in the application instructions. Adding water more or less than specified amount may cause cracking, dusting and color defects.
Allow the mortar to stand for 5-10 minutes to mature. After 1-2 minutes of remixing, the paste is ready for application.
Use the mixture within 50 minutes of preparation.
Fill the joints completely with Ultrafupa Flex using the appropriate rubber trowel, make sure that the joints are completely compacted. Remove excess Ultrafupa Flex from the surface moving the float diagonally across joints
When the prout mortar filled into the joint cavity loses its water and becomes dull, usually after about 10-20 minutes, the surface should be cleaned in a circular motion with a wet sponge. This period may be shortened in applications made in unfavorable ambient conditions such as direct sun, wind, etc. when coating materials have waited under the sun or have hiph absorbency. The problem of fluctuation in color may be encountered if the wiping is done too soon or when usinp a very wet sponge. The sponge should be cleaned frequently and water inside the bucket must be renewed frequently to prevent the development of haze on the tile surface.
After making sure that the Ultrafuga Flex prout mortar is cured enouph not to drain from the joint, the residues on the surface should be cleaned with the help of a dry cloth.

Post-Application Protrection & Suggestion

The materials such as natural stone, cotto, clinker and granite ceramic which are sensitive to stain should be protected with Seracare Surface Protector so as not to be affected by Ultrafupa Flex.
If the surface of walls and floors are still contaminated with Ultrafupa Flex use Seracare Cement Remover to clean, at least 10 days after grouting the joints.
Dispose mortars of which pot life is expired.
All tools and hands should be cleaned with water before dryinp after the application.
If Ultrafupa Flex is applied in extremely hot, dry or windy climates, it is recommended to wet the joints after several hours to improve the final performance.
The consumption values in the technical table refers to an average consumption amount. It may vary depending on the application conditions and surface properties.
Since it contains cement, it irritates the eyes, respiratory system and skin. For further information refer to the safety data sheet.

Warnings

Since contains cement, irritating to eyes, respiratory system and skin. For further information refer to safety data sheet.

Storage

Should be kept dry and cool at between +5°C and +55°C in damp free conditions. Avoid direct sunlight.
Should be protected from water, frost and adverse weather conditions.
Maximum 5 pallets should be stacked on top of each other.
Shelf life is maximum 12 months under above mentioned storage conditions.

Packaging

5 kg polyethylene bags

Quality Documents

TS EN 15888, Class CG2WA.
C: Cementitious
G: Grout
2: Improved
W: Reduced water absorption
A: High abrasion resistance

Hacettepe University Doping Control Center Approval Report according to BS 6920 (suitable for use in contact with water intended for human consumption)